Studying a polymer's reaction to the application of a force can provide details on the material's flow characteristics, modulus, and elasticity. These properties can help scientists and engineers select the right material for a given application.
 
Dynamic mechanical analysis (DMA) measures the mechanical properties of a rubber or polymeric material as a function of temperature, time, frequency, stress, or a combination of these parameters.
 
DMA analysis is particularly useful for thin films, pastes, adhesives and powdered materials. The most common testing conducted by our laboratories includes the testing of vulcanized rubber specimens mixed in the laboratory or excised from actual products.
 
The usual outputs of DMA are Elastic (E') and Viscous (E'') moduli. The ratio of the E'' to the E' is the tan delta and is often called damping, which is a measure of the energy dissipation of a material. The tan delta can also be used to determine the glass transition temperature (Tg) of a material.

Common Standards

  • ASTM D263—Standard Specification for Chrome Oxide Green Pigment

About our Labs

Our labs are equipped with a DMA instrument with the following capabilities:
  • Calibrated temperature range of between -150°C and 300°C
  • Heating rates from 1°C to 20°C per minute 
  • Frequency oscillation ranges between 0.012 Hz to 150Hz
 
Our experts regularly conduct the following analyses:
  • Testing of vulcanized rubber specimens mixed in the laboratory or excised from actual products
  • Frequency sweeps, temperature sweeps, or strain sweeps
  • Storage modulus, loss modulus, complex modulus, tangent delta