Supervisor and Test Engineer - Physical Testing, Materials Science and Engineering
United StatesContact Jeff
This test measures the force per unit width, which is required to separate a flexible substrate (fabric, fiber, wire or sheet metal) from a rubber layer. A tensile force is applied to tear the bonded surface in order to calculate the Adhesion Strength. Once this has been established, a minimum separation force value can be ascertained for continued monitoring to assure this state is maintained.
The adhesion required will vary from product to product due to different rubber formulations, product types and substrate flexibility. This standard covers three specimen types; 180o peel, 90 degree peel and Ring specimens.
Types of products / materials generally tested in our laboratory:
Please Note: The information outlined above is to be used as reference for ASTM D413 Standard Test Method for Rubber Property - Adhesion to Flexible Substrate. Please refer to ASTM International for full details and the most current version.